Quick-set Crack and Joint Sealant
Urethanes make excellent sealants due to their ability to be hard, soft, flexible, water proof, and fast set times. Our UraSeal series is great for sealing joints in runways, bridges, plaza, and highways because of the resistance to jet fuel, hydraulic oils, pedestrian and vehicular traffic. Conforms to Federal Specification SS-S-200 and the easy application allows existing personal to do the application and repairs.
This product performs exceptionally well in horizontal joint or spalled edges where excellent adhesion, high resiliency and weather resistance is needed. Recommended for and has been used for sealing joints in airport runways, highways, bridges, plazas, and industrial concrete floors. After curing has excellent resistance to jet fuel and most hydraulic oils, pedestrian or vehicular traffic. Apply by hand or with applicator gun. Currently used on airport runways due to the quick set time, and easy application by existing personnel.
Applications and Uses
- Airport Runways
- Industrial concrete floors
Alkali Resistant Joint Sealant
UraSeal 100 is a flexible two-component polyurethane joint sealant that is especially well suited for sealing concrete or wood surfaces against water penetration and is resistant to mild acids and alkalis solutions.
UraSeal 100 can be applied as a joint sealant for masonry structures or as full waterproof coating for patios, terraces, balconies or rooftop gardens.
UraSeal 100 has also been used as an adhesive for bonding Safety Surfacing (i.e. large rubber mats and pads) to concrete substrates in horse farms and public walkways.
- 1:1 by Volume mixing ratio
- Hardness 30-40 Shore A
- Resistant to mild acids and alkalis solutions
- Joint sealant for masonry structures
- Full waterproof coating for patios, terraces, balconies or rooftop gardens
Sealant for Exterior Horizontal Deck and Surface Joints
UraSeal 210 is a two-component polyurethane sealant specifically designed to seal against water in concrete joints or as a coating over concrete or wood. UraSeal 210 performs exceptionally well in a horizontal joint or spalled edges where excellent adhesion, high resiliency, and weather resistance are needed. In addition, it has a moderate penetration and structure resistance combined with exceptional elongation.
UraSeal 210 is specially designed for use in exterior horizontal deck and surface joints in and between masonry. It is well suited for a wide variety of environments subject to sunlight, water immersion and attack from most chemicals or industrial pollutants.
- 1:1 by Volume mixing ratio
- Hardness 25-35 Shore A
- Exceptional elongation
- Joints in airport runways, highways, bridges, plazas and industrial concrete floors
- Terraces and patios, roof gardens
- Driveways and loading docks
- Stadiums and other exterior facilities exposed to pedestrian or vehicular traffic