PureCast Series
High Performance Rubber Parts for Molding, Casting, & Coating
The PureCast products are a line of liquid polyurethane resins that are specifically formulated to create extremely durable, high strength rubber parts. In addition these polymers are also used as abrasion and U.V resistant coatings for synthetic ropes and slings. Available in wide range of Shore hardnesses, from 95A to 55D.
The PureCast Series can be processed at room temperature conditions (72 F). Parts cure to full strength without the need for post curing ovens.
- Warming the liquid A & B components (100-120F) is recommended to reduce viscosities for casting applications.
- Maintaining cooler temperatures (72-100F) is recommended for higher viscosities for coating synthetic rope and nylon webbing.
These products feature:
- High elongation
- High Tensile strength
- Excellent tear resistance
- High hardness without brittleness
- Chemical Resistance
- Hydrolysis Resistant (salt and fresh water)
Applications and Uses
- Durable, high strength rubber parts
(wheels, bumpers, seals, rollers) - Abrasion and U.V. resistant coatings for synthetic ropes and nylon lift slings
- Casting performance parts
- Abrasion control pads
- Helicopter lifting slings and rope eyes
Specific Applications
Semi-Rigid Casting Resins
Product Features:
- High strength
- Flexible
- RTV System
- Can be colored with RV series pigments
- U.V. Resistant
- Longest working life of this series (30-40 min)
Product Uses:
- Abrasion resistant pads and bumpers
Semi Flexible Rope Coating and Castings
We manufacture products used in coating rope, fabric and netting. These coatings are easy to mix and apply no special application equipment is required, simply mix and apply by gloved hand. Purecast 603 is the most abrasion resistant high build flexible coating we manufacture. It is recommended for coating rope, fabrics and netting where the highest abrasion resistance and durability is required, we offer a selection of 18 color pigments sold separately.
PureCast 603 is a solvent free low odor coating which can be applied in one or more coats as required. PureCast 603 is a US military specification product used in the manufacture of helicopter lifting slings. The cured hardness is 40 Shore D. Purecast is compatible with most synthetic or natural fiber ropes or fabrics. PureCast 603 contains no solvents and is classified as a nonhazardous material for shipping purposes.
Product Features:
- U.V. Resistant
- Good for industrial parts
- Abrasion resistant applications
- High durability
- 15-30 min working life
Product Uses:
- Abrasion resistant coatings for rope
- Lifting slings
- Military specification
Low-Shrinkage Industrial Molding Material
PureCast 604 is a two component liquid castable polyurethane elastomer that contains no TDI or MOCA. The material when cured has outstanding physical properties, exhibiting high tensile and tear strength along with exceptional abrasion resistance. It is insensitive to typical environmental moisture and exhibits low shrinkage.
Product Features:
- Low shrinkage formulation
- High tensile strength
- High Tear strength
- Exception Abrasion resistance
- Lowest viscosity of the PureCast Series
- 15-30 min working life
Product Uses:
- Flexible urethane parts
High Strength Abrasion and Impact Resistant Coatings
PureCast 605 is a two-component liquid castable polyurethane elastomer that contains no TDI or MOCA. The material when cured has outstanding physical properties. Exhibiting high tensile and tear strength along with exceptional abrasion resistance. It is insensitive to typical environmental moisture and exhibits low shrinkage. The product is reddish/brown in color.
Product Features:
- Highest Tensile Strength of the series
- High viscosity
- Abrasion Resistance
- U.V. Resistant
- 15-30 min working lifee
Product Uses:
- More rigid, less flexible coating, molds, or casts