Safety Industry

Currently, our custom polymers, waterproof, non-slip coating products and more are in use or development for the following applications:

  • Safety Pads
  • Soft Play areas
  • Helicopter landing pads
  • Heavy equipment surfaces
  • Non-skid applications
  • Metal coating
  • Safety markers and bumpers
  • Reflective markers Marine and Industrial
  • Heated mats for icy areas
  • Lighted surfaces for night visibility
  • Spray in bedliners and heavy equipment coating

Specific Applications

TRUEKOTE32TRUEKOTE32
TRUEKOTE31TRUEKOTE31
TrueKote - Flexible Rope Coating & Rope Eye EncapsulationTrueKote - Flexible Rope Coating & Rope Eye Encapsulation
TRUEKOTE25TRUEKOTE25
flexible coatings used in marine, industrial, and water parksflexible coatings used in marine, industrial, and water parks
TOPCOAT5TOPCOAT5
TOPCOAT4TOPCOAT4
TOPCOAT3TOPCOAT3
TOPCOAT2TOPCOAT2
SPEEDLLINER28SPEEDLLINER28
SPEEDLINER27SPEEDLINER27
rope_coating4rope_coating4
rope_coating1rope_coating1
PureCast - Semi Flexible Rope Coating and CastingsPureCast - Semi Flexible Rope Coating and Castings
PureCast - Semi Flexible Rope CoatingPureCast - Semi Flexible Rope Coating
abrasion resistant high build semi flexible coatingabrasion resistant high build semi flexible coating
IMG_1159IMG_1159
IMG_1155IMG_1155
IMG_1151IMG_1151
IMG_1150IMG_1150
IMG_1149IMG_1149
IMG_1144IMG_1144
IMG_1141IMG_1141
IMG_1137IMG_1137
FIBERLOCK2FIBERLOCK2

Safety Rope Coatings

We manufacture products used in coating rope, fabric, and netting for safety and durability, especially for the usage of helicopter lifting slings and other high build applications. Urethane coatings provide an abrasion resistant wear surface and seals out water & debris. Our coatings are compatible with most synthetic or natural fiber ropes or fabrics.

These coatings are easy to mix and apply no special application equipment is required, simply mix and apply by gloved hand. See our rope coating demonstration video.

For coating ropes, nylon slings or high build, choose PureCast 603 or TrueKote CS 252 for potting encapsulation, and the TrueKote CS 100 for a little softer flexible coating. For coating the line and consolidating the fibers and just adding a little bit of coloration, our FiberLock 100 is the best choice.

Semi Flexible Rope Coating

Purecast 603 is the most abrasion resistant high build flexible coating we manufacture. It is recommended for coating rope, fabrics, and netting where the highest abrasion resistance and durability is required, and is a US military specification product used in the manufacture of helicopter lifting slings.

PureCast 603 is a solvent free low odor coating which can be applied in one or more coats as required. We offer a selection of 22 color pigments sold separately.

Flexible Rope Coating

TrueKote CS 100 is a tough elastomeric that been used extensively as a protective coating for marine mooring ropes and nylon lifting slings. The coating has excellent resistance to UV and saltwater and is easily applied by hand, brush or roller. 100% solids contain no hazardous V.O.C.’s. in addition this polymer can be molded into thick castings for encapsulation of rope terminations and eyes or rubber parts.

TrueKote - Flexible Rope Coating & Rope Eye EncapsulationTrueKote CS 100 is a softer more flexible coating than the Purecast 603 product. It provides lower abrasion resistance than our Purecast 603 with a softer hardness of 82 Shore A. Customers will choose this coating when greater flexibility and less abrasion resistance are required.

TrueKote CS 100 has been successfully used to coat Kevlar fabric lifting slings providing waterproofing and wear resistance.

Rope Eye Encapsulation

TrueKote CS 252 is a flexible rubber potting compound used to cast around the neck of braided rope eyes. This product is used with a mold to cast in place rubber onto rope and fabric. It provides flexibility and high elongation where rope eyes experience load stretching.

The TrueKote product series may also be used as a protective coating for soft foam, floor coatings, flexible bumper, and impact resistance pads for playgrounds, horse farms and polymer rope applications.

Colored Rope Coating

FiberLock 100 is a US military specification product used in the manufacture of helicopter lifting slingsFiberLock 100 is a low build vinyl based dip coating used to color coat rope, fabric and netting and is a US military specification product used in the manufacture of helicopter lifting slings. It provides color and consolidates fibers improving slip, increasing the life and wear resistance of synthetic rope and nylon nettings.

This series offers a desirable balance of chemical resistance, film, and thermo-plasticity. Outstanding as a marine maintenance coating, rope coating, buoy coating; offering superior protection to abrasion and weather conditions. Works on a variety of rope products and nettings any substrate where protection and retention and enhancement of physical properties are desired.

Safety Markers & Buoy Coatings

Fluorescent Pigments

This resin can be added to the Fiberlock and TopCoat Series to achieve high visibility in daylight hours. This product is UV Stable, chemical, and salt water resistant while protecting against abrasion and weather conditions. This resin works on a variety of surfaces and numerous applications while enhancing the existing physical properties of the substrate. It is excellent as a safety marker on buoys, ropes, street signs and markers, construction areas, in an area where high visibility is necessary. When added to Fiberlock products it will extend the life and flexibility in heat and humidity. When added to the TopCoat Series it will enhance and protect existing coating while adding high visibility to the finished products.

Available Colors

  • Blaze Orange
  • Fusion Red
  • Horizon Blue
  • Hot Pink
  • Monster Green
  • Phantom Purple
  • Saturn Yellow

Marine Safety Coatings

flexible coatings used in marine, industrial, and water parksOur TrueKote products are used in a number of variations in many applications. They have proven again and again to be one of our most versatile products and marine coatings. It is resilient in wet environments and shows good resistance to chemicals. All the while being extremely durable over flexible foams, synthetic nylon rope, composite line buoys, bumpers, and fenders.

Using Fiberlock and Topcoats will make any substrate or marine product UV stable, salt water resistant, abrasion resistant, low maintenance, and long lasting.

These special polymers are excellent for marine markers, safety markers or buoys; any application where nighttime visibility is necessary or where daytime visibility is necessary. When used with our Topcoats over soft foams it will add another dimension of protection and UV stability to the project.

Waterproofing Coatings

TrueKote CS-150S is a two component low VOC urethane coating designed for application over flexible closed cell foam, metal, wood metal and other urethane surfaces. It provides excellent impact and abrasion resistance on metal surfaces, used on Industrial equipment applications and in amusement parks where a smooth flexible, high durability abrasion resistant coating is required.

Speedliner - Waterproof & Non-Skid Coating for Industrial ApplicationsSpeedliner™ is a high performance urethane elastomeric coating designed for high build applications. When fully cured Speedliner™ forms a tough, abrasive resistant rubber coating, suited for applications requiring protection from impact, abrasion or corrosion on metal, wood or concrete surfaces.

Used as a spray in bed liner for the automotive industry for over twenty years, for water proofing boats and marine applications, excellent non skid and non-slip on wood and concrete surfaces. We also have a specially formulated version for acid and alkali resistant or higher abrasion applications:  Speedliner™ CRX is a high performance urethane elastomeric texture coating, specifically designed for environments that require resistance to acid and alkali. When fully cured, Speedliner™ CRX forms an extremely tough, abrasive resistant rubber coating, especially well-suited for applications requiring protection from impact, abrasion, or corrosion on metal, wood or concrete surfaces.

Speedliner™ CRX textured surfaces provide an excellent non-slip surface in both wet and dry environment. Speedliner™ CRX can be used for waterproofing and creating non-slip surfaces.

Additives include Kevlar fiber for added cut and tear resistance, sand, or aluminum oxide grit may be added to achieve additional non-skid properties. Many colors available from our SL pigment series.

 

UraSeal 100 is a flexible two-component polyurethane joint sealant that is especially well suited for sealing concrete or wood surfaces against water penetration and is resistant to mild acids and alkalis solutions.

UraSeal 100 has also been used as an adhesive for bonding Safety Surfacing (i.e. large rubber mats and pads) to concrete substrates in horse farms and public walkways.

 

For waterproofing electrical components, choose our GelCast products, which range in consistency from soft elastomeric rubbers to extremely soft gels with high tack to provide for continuous surface coupling and electrical encapsulation.

Non-Skid Coatings

TrueKote CS-200 - hard, durable non-skid coatingTrueKote CS-200 is an aliphatic two-component polyurethane non-skid coating that when fully cured forms a hard, durable non-skid textured surface.

TrueKote CS-200 may be used for exterior or interior industrial maintenance and product finishing where slip resistant texture surfaces and excellent long-term protections are required. This coating has been used successfully with urethane base coating on aircraft, railroad cars, ships, storage tanks, metal bridges, piping and structural steel, on concrete, wood and some plastics, including vinyl. Resistance of the coated parts to wear, weathering, corrosion and impact is rated with the highest of all commercially available coating types.

The flexibility of TrueKote CS-200 is inherent in the basic polymer and not achieved using plasticizers, therefore, the coatings are not subject to embrittlement with age.

 

Speedliner™ CRX is a high performance urethane elastomeric texture coating, specifically designed for environments that require resistance to acid and alkali. When fully cured, Speedliner™ CRX forms an extremely tough, abrasive resistant rubber coating, especially well-suited for applications requiring protection from impact, abrasion, or corrosion on metal, wood or concrete surfaces. Speedliner™ CRX textured surfaces provide an excellent non-slip surface in both wet and dry environment.

 

TopCoat is a two-component aliphatic urethane coating offering resistance to corrosion, abrasion, chemicals, and impactTopCoat is a two-component aliphatic urethane coating offering resistance to corrosion, abrasion, chemicals, and impact and rated with the highest of commercially available coatings. This product series is very versatile in that it will work with several of our other product lines.

These coatings have been very successful over a urethane base coat in water parks, on aircraft, railroad cars, ships, storage tanks, metal bridges, piping, and structural steel, and on wood, concrete, and some plastics, including vinyl. The finish is flexible with the use of plasticizers, so it is not subject to becoming brittle with age. The Topcoat CRX is specifically designed for environments requiring resistance to high acid and alkali conditions. TopCoat may be used with Fluorescent Color Pigments to enhance and protect existing coating while adding high visibility to the finished products.