Industrial Polymers began in the coatings industry over 30 years ago and since we have developed Spray in Truck bed liners for private consumers, protective coatings for industrial, commercial, and military vehicles.
We also have coatings compliant with The US Military Specifications.
Coatings for metal, wood, urethane roofs, ropes, concrete, masonry, soft foam or EPS foam. Finishes range from hard protective or flexible, glass smooth to ruff non-skids, sandable and paintable. We offer resistance to impacts, salt water, elements, acid, alkalis and for UV stability.
Polyurethanes offer the most versatile range of engineered properties which allows for the formulation of extremely durable coatings with extremely high mechanical properties and resistance to the elements of the intended work environment.
Here are a few attributes that will determine the proper selection of the Polyurethane coating for the target application.
Flexible and Rigid Coatings
We manufacture products used in coating rope, fabric and netting. These coating are easy to mix and apply no special application equipment is required, simply mix and apply by gloved hand. See our rope coating demonstration video on this page. Purecast 603 is the most abrasion resistant high build flexible coating we manufacture. It is recommended for coating rope, fabrics and netting where the highest abrasion resistance and durability is required, we offer a selection of 18 color pigments sold separately. PureCast 603 is a solvent free low odor coating which can be applied in one or more coats as required. PureCast 603 is a US military specification product used in the manufacture of helicopter lifting slings. The cured hardness is 40 Shore D, see technical data bulletin for complete information. Purecast is compatible with most synthetic or natural fiber ropes or fabrics. PureCast 603 contains no solvents and is classified as a nonhazardous material for shipping purposes.
TrueKote CS 100 is an abrasion resistant high build flexible rubber coating. It is recommended for coating rope, fabrics and netting where abrasion resistance and flexibility are required; we offer a selection of 18 color pigments sold separately. TrueKote CS 100 is a softer more flexible coating than the Purecast 603 product. It provides lower abrasion resistance than our Purecast 603 with a softer hardness of 82 Shore A. It is easy to mix and apply by hand no special equipment is required. Customers will choose this coating when greater flexibility and less abrasion resistance are required. TrueKote CS 100 has been successfully used to coat Kevlar fabric lifting slings providing waterproofing and wear resistance. TrueKote CS 100 is compatible with most synthetic or natural fiber ropes or fabrics see technical data bulletin for complete information. TrueKote CS 100 contains no solvents and is classified as a nonhazardous material for shipping purposes.
FiberLock 100 is a low build vinyl based dip coating used to color coat rope, fabric and netting. It provides color and consolidates fibers improving slip. FiberLock 100 penetrates deep within fibers and air dries.We offer a selection of 18 colors; customers may order this product clear and add colors as needed or pre-colored. FiberLock 100 is a US military specification product used in the manufacture of helicopter lifting slings. FiberLock is compatible with most synthetic or natural fiber rope, fabric and netting see technical data bulletin for complete information. FiberLock 100 contains solvent and is classified as a flammable material for shipping purposes.
TrueKote CS 252 is a flexible rubber potting compound used to cast around the neck of braided rope eyes. This product is used with a mould to cast in place rubber onto rope and fabric. It provides flexibility and high elongation where rope eyes experience load stretching. TrueKote CS 252 is a US military specification product used in the manufacture of helicopter lifting slings. TrueKote CS 252 contains solvent and is classified as a flammable material for shipping purposes, see technical data bulletin for more information.
Our coating and potting products are suitable for fresh or salt water applications. For shipping purposes, our rope coating products (in liquid form) do not freeze and are not damaged by low temperatures.
Learn more about our products series for coatings:
A Semi rigid casting urethane resin, high strength, flexible coatings used in marine, industrial, and water parks. Resistant to wet environments and has good chemical resistance. TrueKote is extremely durable over flexible foams; best suited for synthetic nylon rope, composite line buoys, marine bumpers and fenders and over flexible foam products. TrueKote 100 non-spray versions are non- flammable, offers minimal shrinkage, and contains no VOC’s, ships non-hazardous. Apply with brush, dip method, roll-on, trowel or rotation. TrueKote spray versions can be applied with a pressure pot system, the spray version is hazardous. All products in this series are available in various colors and set times. Hardness range from 75 Shore D to 90 Shore A.
These products feature:
- Abrasion resistance
- U.V. stability
- Impact protection
Tough elastomeric that been used extensively as a protective coating for marine mooring ropes and nylon lifting slings. The coating has excellent resistance to UV and saltwater and is easily applied by hand, brush or roller. 100% solids contain no hazardous V.O.C.’s. in addition this polymer can be molded into thick castings for encapsulation of rope terminations and eyes or rubber parts.
High-performance low viscosity elastomeric coating that provides for excellent long-term resistance to U.V., Saltwater, Abrasion, and Impact. General uses include a smooth finish for the protection of industrial metal, concrete and wood surfaces. Also used as a low viscosity “dip” protective coating for synthetic ropes and nylon slings. Long working life and low viscosity allows for application with pressure pot spray systems.
Extremely durable “non-skid” texture coating that is easily applied with a simple Hopper Gun. In addition, this coating has excellent long-term resistance to U.V., Saltwater, and abrasion. General uses are for increased “non-slip” properties over concrete, wood, metal or polymer surfaces. Available in 22 factory colors, with the ability to accept custom automotive tint colors.
Soft elastomeric with very high elongation and tensile strength that been used extensively as a protective coating for military helicopter ropes and nylon lifting slings. The coating has excellent resistance to UV and saltwater and is easily applied by hand, brush or roller. 100% solids. In addition, this polymer can be molded into thick castings for encapsulation of rope terminations and eyes
The PureCast products are a line of liquid polyurethane resins that are specifically formulated to create extremely durable, high strength rubber parts. In addition these polymers are also used as abrasion and U.V resistant coatings for synthetic ropes and slings. Available in wide range of Shore hardnesses, from 95A to 55D.
Similar to TrueKote 100 but with higher physical properties and faster set times. High strength elastomer that been used extensively as a protective coating for marine mooring lines helicopter and nylon lifting slings. The coating has excellent resistance to UV and saltwater and is easily applied by hand, brush or roller.100% solids, contain no hazardous V.O.C.’s. In addition, this polymer can be molded into thick castings for encapsulation of rope terminations and eyes or rubber parts.
This series offers a desirable balance of chemical resistance, film, and thermo-plasticity. Outstanding as a marine maintenance coating, rope coating, buoy coating; offering superior protection to abrasion and weather conditions. Works on a variety of rope products and nettings any substrate where protection and retention and enhancement of physical properties are desired.
In low temperatures, it retains good flexibility and ages well in heat and humidity. Fiberlock will Increase the life and wear resistance of synthetic rope and nylon nettings. This product is available in a variety of colors. Apply using the dip and dry method. Hardness 65-75 Shore A.
Low viscosity fast dry “dip” coating for synthetic rope used to consolidate fibers to reduce infiltration of sand and dirt and greatly reduce internal fiber wear. In addition, Fiberlock 100 increases the “slip” of the line and reduces friction and adds color to the finished line. Available in 22 standard and 6 fluorescent colors.
**THIS PRODUCT COMPLIES WITH UNITED STATES MILITARY SPECIFICATIONS**
This two-component semi-rigid coating is 100% solids recommended for Styrofoam, EPS foam, fabrication of signs, decorative themeing, visual displays and concrete molds cut from EPS foam. Styrospray eliminates the need for expensive high-pressure spray equipment. When fully cured the surface may be sanded or machined. Can be used in place of fiberglass in some applications and painted with either water or solvent based paints. This product is used to create a smooth surface on carved or wire cut foam and to enhance the strength and durability of finished parts. We recommend this product be used with our Styroprime to obtain a strong bond to the surface you are coating. Styrospray can be brushed, rolled or sprayed through a Hopper Gun. The work life of this product is unlimited after mixed if stored in an air tight container. Styrospray contains no VOC’s will not damage paint or foam surfaces. Hardness 65 Shore D. StyroSpray 1000 is excellent for cosplay designers as well as prop makers.
Hard Coat for E.P.S (expanded polystyrene foam), unique formulation allow for long working time with rapid curing as the coating is applied. Greatly improves the durability and handling of cut foam parts and painting with automotive or common solvent-based acrylic paint. The coating is easily hand applied with a brush or soft foam roller and provides hard impact resistance surface when fully cured. Must be used with StyroPrime when going over foam.
StyroPrime is water based acrylic latex rubber primer formulated for fast drying and high adhesion to cut or carved foam surfaces. It is formulated to seal the surface of carved foam prior to the application of StyroSpray 1000 hard coating. StyroPrime helps promotes a smooth bubble free hard coating application when a very smooth surface finish is desired.
High-performance urethane elastomeric coating designed for high build applications. When fully cured forms a tough, abrasive resistant rubber coating, suited for applications requiring protection from impact, abrasion or corrosion on metal, wood or concrete surfaces. Texture provides an excellent non-slip surface.
Used as a spray in bed liner for the automotive industry for over twenty years, for waterproofing boats and marine applications, excellent non skid and non slip on wood and concrete surfaces.
Additives include Kevlar fiber for added cut and tear resistance, sand, or aluminum oxide grit may be added to achieve additional non-skid properties. Many colors available from our SL pigment series. We also have a specially formulated version for acid and alkali resistant or higher abrasion applications. All Speedliner products are easy to apply with a standard hopper gun. Hardness 90-95 Shore A.
Extremely durable high build elastomeric texture coating that is easily applied with a simple Hopper Gun and 100 psi of supplied air. In addition, this coating has excellent long-term resistance to U.V., Saltwater, Abrasion, and Impact. General uses include spray in-place truck bed liners, protection of industrial metal, concrete and wood surfaces. Available in 22 factory colors, with the ability to accept custom automotive tint colors.
Physical properties can be enhanced with the addition of Kevlar™ fiber. The addition of aluminum oxide, sand or rubber crumb can also be added to improve “non-skid” properties.
Similar to Speedliner 1000 but with 20 % higher physical properties and enhance hydrocarbon and chemical resistance.
Similar to Speedliner 1000 with improved resistance to acid and alkali i.e. chlorine
Recommend for applications that do not require UV resistance or hydrocarbon resistance
This product series is very versatile in that it will work with several of our other product lines. It is a two-component aliphatic urethane coating offering resistance to corrosion, abrasion, chemicals, and impact and rated with the highest of commercially available coatings. This product can be applied by spraying with conventional airless or electrostatic applicators or maybe brushed on to achieve an excellent gloss and color retention for exterior surfaces.
These coatings have been very successful over a urethane base coat in water parks, on aircraft, railroad cars, ships, storage tanks, metal bridges, piping, and structural steel, and on wood, concrete, and some plastics, including vinyl. The finish is flexible with the use of plasticizers, so it is not subject to becoming brittle with age. The Topcoat CRX is specifically designed for environments requiring resistance to high acid and alkali conditions. TopCoat may be used with Fluorescent Color Pigments.
Low viscosity spray coating for use as a color stable and or clear coat for polyurethane basecoat coat or molded parts the cured polymer is a flexible elastomeric UV stability. Commonly used with flexible closed cell rubber foam to reduce impact and increase safety for children’s soft play areas.
Available in 22 standard and 6 fluorescent colors.
Similar to Topcoat # 9 but higher hardness and durability, recommended for ridge substrates that do not require flexibility.
A high-performance urethane elastomeric coating, specifically designed for environments that require resistance to high acid and alkali conditions. When fully cured, TopCoat CRX forms an extremely tough, abrasive resistant rubber coating, especially well-suited for applications requiring protection from impact, abrasion, or corrosion on metal, wood or concrete surfaces.