Architectural Design

Hard coats for expanded polystyrene foam (EPS)

StyroSpray 1000 is an easily applied hardcoat for EPS foam that greatly enhances the durability of cut architectural shapes and designs for indoor and outdoor applications.

  • Architectural theming
  • Museum exhibits
  • Indoor and outdoor 3-Dimensional signs

SpeedFlex is a fast set, flexible polyurethane specifically designed for:

  • Interior flexible trim molding
  • Architectural cast finials
  • Synthetic wood trim

InstaGel is a flexible, brush-on product for making rubber molds from objects or wall surfaces which cannot be placed in standard box molds (any 3-dimensional objects or vertical wall surface). After mixing, InstaGel® thickens to a creamy spread-able gel which can be brushed onto vertical or overhead surfaces without sagging, or running. Within 24-hours InstaGel® cures to a tough rubber mold. Before applying InstaGel®, surfaces should be coated with silicone or wax mold release and must be free of moisture to prevent unwanted bonding or surface bubbling. Mold releasing agents must be used to ensure easy removal of InstaGel® rubber mold from the master.

Finished-work-in-placeFinished-work-in-place
Front-view-lion-originalFront-view-lion-original
image0011image0011
IMG_0914_2IMG_0914_2
IMG_0915_2IMG_0915_2
moody01moody01
Original-coated-with-InstagelOriginal-coated-with-Instagel
PROTOCAST22PROTOCAST22
PROTOCAST23PROTOCAST23
PROTOCAST30PROTOCAST30
PROTOCAST31PROTOCAST31
PROTOCAST32PROTOCAST32
STYROSPRAY2STYROSPRAY2
STYROSPRAY3STYROSPRAY3
STYROSPRAY11STYROSPRAY11
STYROSPRAY23STYROSPRAY23
Uragel-770-overcoatUragel-770-overcoat