TrueKote CS-100FR (fire resistant) provides the same physical properties and cure times as the original TrueKote CS-100 in a fire-tested version. Applied with aggregate it is formulated as a nonskid fire retardant coating for marine floor and deck surfaces. Test method, NT Fire 007-NS-INSTA 414, approved, Norwegian Fire Research Laboratory. Compression tested to 10,000 psi, ASTM D575-91, test method B. Dielectric Testing certified to 10,000 VAC, 25,000 VDC, testing method ASTM D149.

Properties

Working Properties

Mix Ratio By Weight

100 parts A/ 22.9 part B

Mix Ratio By Volume

100 parts A/ 18.1 parts B

Viscosity @ 72°F (Mixed)

15,000 CPS

Color

A-side:

Clear

Color

B-side:

Charcoal Gray

Color

Mixed:

Charcoal Gray

Application time @ 72°F

30-45 minutes

Tack Free time @ 72°F

6 hours

Print Free time @ 72°F

12 hours

Ultimate Cure @72°F

7 days

Recoat time @ 72°F

16-96 hours

 

 

Physical Properties

Specific Gravity (Part A)

1.01

Specific Gravity (Part B)

1.27

Specific Gravity (Mixed)

1.05

Weight/Gallon Part A

8.38 lbs.

Weight/Gallon Part B

10.60 lbs.

Weight/Gallon Mixed

8.72 lbs.

Hardness @ 72° F

ASTM 2240-85

75-85 Shore A

Tear Strength

ASTM D-412 die C

385 (lbs./in.)

Tensile Strength

ASTM D-412 die C

3200 psi

Elongation

ASTM D-412 die C

350%

Volatile Organic Compounds

ASTM D-2369

0%

Fungus Resistance

Non-nutrient

Reparability

Excellent

Service Temperature

-40°F to 200°F

Shrinkage

.0005 m/m

Water Absorption

0.01

 

Clean Up

Dispose of all empty TrueKote CS-100FR component containers in accordance with local, state and federal regulations. Empty component containers can be rendered non-hazardous by rinsing the containers with a small amount of mixed material and allowing the solvents to evaporate. The containers will then contain non-hazardous cured urethane.

Storage and Shelf Life

TrueKote CS-100FR is shipped from the factory in sealed containers. The containers should be stored in a cool dry area that is protected from direct sunlight and moisture. Storage temperatures should not exceed 80°F. The shelf life of factory sealed containers stored under these conditions is six months. Containers that have been opened should be resealed immediately after material has been removed in order to prevent solvent evaporation.

Shipping

Shipping Class: Class 55 Non-hazardous