Speedliner Rigid Casting Urethanes Semi-Rigid Casting Urethanes Transparent Casting Compounds Molding Compounds Clear Elegance Brush-on Molding Gels Coatings & Sealants StyroSpray Hard Coatings Primers Expanding Urethanes

PureCast™ is our strongest most abrasion resistant flexible casting product. PureCast™ provides the strength and durability of a heat-cured urethane in a simple to use RTV system. Recommended for casting industrial wiper blades, wheels, rollers and wear seals. PureCast™provides you with the ability to cast high strength, flexible urethane parts in urethane or silicone molds (see TrueCast™ Molding Compounds). PureCast™ is available in four dif ferent hardness, mix ratios and cure times to best fit your manufacturing process (see chart below). PureCast™ can be colored with our RV series pigments. We recommend using black or darker colors to prevent color change or applying a UV resistant coating (see Urethane Coatings). UV additives are available. 

SpeedSet™ is a lower priced flexible casting polymer used for casting visual displays and medium durability working parts. It can be used for casting lightweight wall display panels to simulate a stone or fossilized appearance. Museums and amusement parks have used SpeedSet™ to create movable wall panels and backdrops for visual displays. Our customers have also used SpeedSet™ for encapsulating electrical components and in the manufacture of impact surfaces for golf clubs. SpeedSet™ is available in four different hardness, mix ratios and cure times to best fit your manufacturing process (see chart). SpeedSet™ can be colored with our RV series pigments to improve UV color stability. We recommend using black or darker colors to prevent color change (see TopCoat). 

 
 

ProtoCast 80R™ is our most popular low viscosity casting polymer. It provides a 3 to 5- minute working life and rapid 10 to 20-minute demold time. ProtoCast 80R™ rapidly produces high detail prototypes or display parts. It also simulates the density and appearance of natural white animal bone or used with black pigment produces the appearance of carved ebony wood. ProtoCast 80R™, and our RimCast™ products are very low viscosity, rapid set, rigid urethane compounds which cure quickly to a hard, impact resistant casting. Each of these products is non-sensitive to moisture after cure and will readily bond to itself if secondary pours are required. ProtoCast™ and RimCast™ products are recommended in applications where a “injection thermoplastic feel” is desired or white color is required.  

 
TrueKote™ CS-100 is a very slow set (45-minute working life) 85 shore A casting or coating product which works well in wet environments when fully cured. TrueKote™ is UV color stable (except white) and contains no M.O.C.A. or TDI. TrueKote™ protects rope rigging against damage from cuts and abrasion. Over flexible foam it provides a durable play surface which resists cuts and punctures. TrueKote™ is also used for encapsulating or potting fittings and eyes used in marine rope riggings. The standard color is medium blue. Clear or other colors are available. displays cast from SpeedSet™ 401. Large metal parts encapsulated with PureCast™ 603. Silicon Rubber Mold. ProtoCast™ 80R rapidly reproduces high-definition parts with the look and density of carved ivory. Replica firearm cast in SpeedSet™ 401 from TrueCast™ urethane rubber mold.