Semi-Rigid Casting & High Strength Flexible Coatings

Semi-Rigid Casting & High Strength Flexible Coatings A Semi rigid casting urethane resin, high strength, flexible coatings used in marine, industrial, and water parks. Resistant to wet environments and has good chemical resistance. TrueKote is extremely durable over flexible foams; best suited for synthetic nylon rope, composite line buoys, marine bumpers and fenders and over flexible foam products. Truekote 100 non- spray versions are non- flammable, offers minimal shrinkage, and contains no VOC's, ships non-hazardous. Apply with brush, dip method, roll-on, trowel or rotation. Truekote spray versions can be applied with a pressure pot system, the spray version is hazardous. All products in this series are available in various colors and set times. Hardness range from 75 Shore D to 90 Shore A.

These products feature:

  • Abrasion resistance
  • U.V. stability
  • Waterproofing
  • Impact protection

 

Applications and Uses

  • Marine markers
  • Safety markers or buoys
  • Encapsulation
  • Impact control
  • Non-slip safety surfaces
  • For use on metal, wood, plastic, or concrete

 

Specific Applications

 

 

 

 

Protective Rope Coating

Protective Rope CoatingTrueKote CS-100 can be used as a protective coating for rope and closed cell flexible foam. It provides a slow 45-minute working life and may also be used as a casting product. TrueKote CS-100 protects rope rigging against damage from cuts and abrasion. Over flexible foam it provides a durable flexible surface, which resists cuts and punctures. TrueKote CS-100 is also used for encapsulating or potting fittings and eyes used in marine rope riggings. TrueKote CS-100 can be colored with SL or RV pigment dispersions

TrueKote CS 100 is an abrasion resistant high build flexible rubber coating. It is recommended for coating rope, fabrics and netting where abrasion resistance and flexibility are required; we offer a selection of 18 color pigments sold separately. TrueKote CS 100 is a softer more flexible coating than the Purecast 603 product. It provides lower abrasion resistance than our Purecast 603 with a softer hardness of 82 Shore A. It is easy to mix and apply by hand no special equipment is required. Customers will choose this coating when greater flexibility and less abrasion resistance are required. TrueKote CS 100 has been successfully used to coat Kevlar fabric lifting slings providing waterproofing and wear resistance. TrueKote CS 100 is compatible with most synthetic or natural fiber ropes or fabrics see technical data bulletin for complete information.

Product Features:
  • Slow working life
  • Flexibility
  • U.V. resistance
  • Saltwater resistance
  • Waterproofing
  • Wear resistance
  • 75-85 Shore A Hardness
Product Uses:
  • Protective coating for marine mooring ropes
  • Protective coating for nylon lifting slings
  • Durable, flexible surface over flexible foam
  • Castings for encapsulation of rope terminations and eyes or rubber parts
  • Coating Kevlar fabric lifting slings

 

 

Fire Retardant Coating

TrueKote CS-100FR (fire resistant) provides the same physical properties and cure times as the original TrueKote CS-100 in a fire-tested version. Applied with aggregate it is formulated as a nonskid fire-retardant coating for marine floor and deck surfaces. Test method, NT Fire 007-NS-INSTA 414, approved, Norwegian Fire Research Laboratory. Compression tested to 10,000 psi, ASTM D575-91, test method B. Dielectric Testing certified to 10,000 VAC, 25,000 VDC, testing method ASTM D149.

Product Features:
  • Fire resistant
  • U.V. resistance
  • Saltwater resistance
  • Waterproofing
  • Wear resistance
  • 75-85 Shore A Hardness
Product Uses:
  • Nonskid fire-retardant coating for marine floor and deck surfaces
  • Encapsulating or potting fittings and eyes used in marine rope riggings

 

 

Industrial & Marine Safety Coatings

Industrial & Marine Safety CoatingsTrueKote CS-150S is a two component low VOC urethane coating designed for application over flexible closed cell foam, metal, wood metal and other urethane surfaces. It provides excellent impact and abrasion resistance on metal surfaces and can be sprayed by pressure pot or airless spraying equipment and can be built up in multiple spray passes to a thick coating. It cures to a high performance urethane elastomer that has high physical properties. TrueKote CS-150S is used on Industrial equipment applications and in amusement parks where a smooth flexible, high durability abrasion resistant coating is required.

TrueKote CS155-S is a two component, spray or brushable, high performance urethane liquid elastomer, clear or color coating. TrueKote CS155-S is easy to apply using standard airless spray equipment and can be built up in multiple spray passes to a thick coating. It cures to a high performance urethane elastomer that has excellent physical properties and outstanding resistance to abrasion and wear. TrueKote CS155-S has better resistance to weathering than aromatic type urethanes, and with proper preparation most surfaces can be coated. TrueKote CS155-S may also be used as a coating for soft foam, floor coatings, flexible bumpers, synthetic rope coat, impact resistance pads for playgrounds and horse farms. TrueKote CS155-S may also be used as a protective coating for outstanding extended wear application on most metallic surfaces.

Product Features:
  • Spray or brushable
  • Impact and abrasion resistance
  • Saltwater resistance
  • U.V. resistance
  • Waterproofing
  • Chemical resistance
  • High durability
  • Available in 22 factory colors
Product Uses:
  • Industrial equipment applications
  • Coating for soft foam, floor coatings, flexible bumpers, synthetic rope coat, impact resistance pads for playgrounds and horse farms
  • Protective coating for outstanding extended wear application on most metallic surfaces

 

 

Non-Skid Coating

Non-Skid CoatingTrueKote CS-200 is an aliphatic two-component polyurethane non-skid coating that when fully cured forms a hard, durable non-skid textured surface. This unique coating is formulated for exterior applications and has excellent retention of physical properties and color. CS-200 provides excellent resistance to corrosion, abrasion, chemicals and impact. CS-200 may be used on various metal substrates, wood, plastics and concrete, and is applied via conventional texture roller or sprayed with a simple hopper gun for textured coatings.

TrueKote CS-200 may be used for exterior or interior industrial maintenance and product finishing where slip resistant texture surfaces and excellent long-term protections are required. This coating has been used successfully with urethane base coating on aircraft, railroad cars, ships, storage tanks, metal bridges, piping and structural steel, on concrete, wood and some plastics, including vinyl. Resistance of the coated parts to wear, weathering, corrosion and impact is rated with the highest of all commercially available coating types.

The flexibility of TrueKote CS-200 is inherent in the basic polymer and not achieved by the use of plasticizers, therefore, the coatings are not subject to embrittlement with age.

Product Features:
  • Non-Skid
  • Excellent resistance to corrosion, abrasion, chemicals and impact
  • U.V. resistance
  • Saltwater resistance
  • Available in 22 factory colors
Product Uses:
  • “non-slip” properties over concrete, wood, metal or polymer surfaces
  • Exterior or interior industrial maintenance and product finishings

 

 

Flexible Rubber Potting Compounds

Flexible Rubber Potting Compounds

TrueKote CS-252 is a two component, high performance elastomer, for coating or casting TrueKote CS-252 to a high performance urethane elastomer that has high, excellent physical properties and outstanding resistance to abrasion. TrueKote CS-252 may also be used as a coating for soft foam, floor coatings, flexible bumper, and impact resistance pads for playgrounds, horse farms and polymer rope applications. TrueKote CS-252 may also be used as a protective coating for outstanding extended wear application on most metallic surfaces.

TrueCast CS 252 is a flexible rubber potting compound used to cast around the neck of braided rope eyes. This product is used with a mould to cast in place rubber onto rope and fabric. It provides flexibility and high elongation where rope eyes experience load stretching. TrueCast CS 252 is a US military specification product used in the manufacture of helicopter lifting slings. TrueCast CS 252 contains solvent and is classified as a flammable material for shipping purposes

Product Features:
  • Flexibility
  • High elongation
  • High tensile strength
  • Abrasion resistance
  • U.V. resistance
  • Waterproofing
  • Impact resistance
  • Wear resistance
  • Encapsulation properties
Product Uses:
  • US military specification product used in the manufacture of helicopter lifting slings
  • Used with a mold to cast in place rubber onto rope and fabric
  • Coating for soft foam, floor coatings, flexible bumper, and impact resistance pads for playgrounds, horse farms and polymer rope applications
  • Protective coating for outstanding extended wear application on most metallic surfaces

 

 

Technical Data and Comparison

TrueKote Series: Product Comparison

Truekote Product Comparisons Chart

View Larger Image

On a mobile device? Get the Downloadable PDF

 

 

Request Your Free Information Kit


Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input