Semi Rigid Coating Systems - StyroSpray Series

These two component semi rigid coating systems are 100% solids recommended for:

  • Styrofoam
  • EPS foam
  • Fabrication of Signs
  • Decorative Theming
  • Visual displays
  • Concrete molds cut from EPS foam.

Creates a smooth surface on carved or wire cut foam and to enhance the strength and durability of finished parts

Styrospray 1000 eliminates the need for expensive high pressure spray equipment; Styrospray 1000 can be brushed, rolled or sprayed through a Hopper Gun.

Hopper spray guns are low cost, easy to use and clean up.

StyroPrime is an optional surface sealer which helps achieve a smoother surface over cut or carved foam.

Product Highlights

  • When fully cured the surface may be sanded or machined.
    StyroSpray be used in place of fiberglass in some applications and painted with either water or solvent based paints.
  • Color pigments can be mixed with StyroSpray.
  • StyroSpray works well for bondind fabrics or paper to foam
    When you laminate fabric over EPS foam you create a very high strength surface
  • StyroSpray also works as a bonding adhesive for your foam
  • StyroSpray is an excellent coating for paper mache
    StyroSpray creates a plastic waterproof non-chip surface over paper mache

Call Us Now: 800-766-3832

  1. Fill out the form below and we will contact you shortly to discuss your StyroSpray® needs.
  2. Full Name(*)
    Invalid Input
  3. Company(*)
    Invalid Input
  4. Email(*)
    Invalid Input
  5. Phone(*)
    Invalid Input
  6. *To request a free information packet, enter your mailing address here!
  7. Mailing Address
    Invalid Input
  8. Details / Information Needed(*)
    Invalid Input
 

Photos:

Videos:

Dino Bull EPS Foam Sculpture Coated with StyroSpray 1000 Hard Coating
Dino Bull EPS Foam Sculpture Coated with StyroSpray 1000 Hard Coating

Industrial Polymers Corporation USA manufacturer of StyroSpray 1000 an easy to apply plastic hard coating product for carved foam sculptures. Dino-Bull was brush applied with Styrospray 1000 urethane…

Styrospray Mixing & Application
Styrospray Mixing & Application
Video demonstration of StyroSpray 1000 hard coating for EPS foam.
StyroPrime Foam Sealer Demonstration
StyroPrime Foam Sealer Demonstration
Demonstration of StyroPrime sealer for EPS foam coating, the first step in Styrospray 1000 hard coating application.
Hopper Gun
Hopper Gun
Demonstration of hopper spray gun application of Styrospray 1000 hard coating for cut or carved foam construction
Hopper Gun Clean Up Procedure for StyroSpray or Speedliner
Hopper Gun Clean Up Procedure for StyroSpray or Speedliner

How to clean hopper spray gun after spraying StyroSpray or Speedliner coatings. This simple spray gun replaces expensive high pressure polyurea spray system to apply high durability coatings to eps…

StyroSpray Hard Coating Applied with Hopper Spray
StyroSpray Hard Coating Applied with Hopper Spray

Industrial Polymers Corporation demonstration video of StyroSpray 1000 hard coating application. Spray on application for paper mache and EPS foam construction. Easy to apply plastic hard coating…

Styrospray 1000 Foam Coatings
Styrospray 1000 Foam Coatings
Easy to Apply Plastic Hard Coatings for Carved EPS Foam.
Previous Next Play Pause
 

StyroSpray Series: Product Comparison

StyroSpray-Product Comparisons Chart

View Larger Image

On a mobile device? Get the Downloadable PDF